User`s manual

System Description 21
Matrix MXC-2000 Series
User’s Manual
2.2.9 S-Video Connector
The MXC-2002/2011/2002D/2011D controller provides 7-pin S-
video connector on the front panel. The S-Video signals are avail-
able on the four matching pins (pin #1 to #4). And one of the other
three pins carries the Composite Video signal for non-S-Video dis-
plays. A specific "S-Video to Composite" cable is shipped with the
MXC-2000 series for connecting to the composite video connector
of your TV.
2.2.10 VGA connector
The D-sub 15-pin VGA connector is used to connect your MXC-
2002/2011/2002D/2011D controller to a monitor. The MXC-2000
series supports only analog (VGA) monitors.
PIN Signal Name
1 Ground (all grounds are connected together)
2Ground
3 S-Video Luminance Signal
4 S-Video Chrominance Signal
5 Composite Video signal
6Ground
7--
Table 2-6: S-Video Connector