User`s manual

Reference Manual 69
vref_polar
Specifies the polarity of the vertical reference signal provided
by the sensor or emulator. Only valid in non-656 mode.
X 0: V reference polarity will be active-high
X 1: V reference polarity will be active-low
field_id_polar
Specifies the polarity of the field ID.
X 0: Top field ID = 0; Bottom field ID = 1
X 1: Top field ID = 1; Bottom field ID = 0
sensor_bit_width
The bit width of the image data provided by sensor or emulator.
X 0: Data is 8-bit wide
X 1: Data is 10-bit wide
hv_resync_enable
By enabling this option, the video compression process pauses
when the input video signal is temporarily out-of-sync. It will
resume and re-synchronize to the video input signal when reg-
ular synchronization signals are recovered. Video signals from
some image sensors have constantly changing horizontal and
vertical periods. This option needs to be disabled when work-
ing with such sensors.
reserved
Reserved for future use.