User`s manual

38 ViewCreator Utility
stream to a file. The path of the file can be set in the Set Recording
command of menu Record.
Configurations
Record
Execute the Record Filter command of menu Configuration to
open a setting menu. Click OK or Apply to apply these set-
tings.
This command can only be used in the single channel display
mode (select a video Port icon in the Tree Browser window).
Preview
Execute the Preview Filter command of menu Configuration to
open a setting menu. There are two tabs allowing the user to
select video standard and adjust the video amplifier. The
changes will apply to the Image View window immediately.
Supported video standards are NTSC and PAL. Supported
adjust video amplifiers are: brightness, contrast, hue, satura-
tion, sharpness, gamma, white balance, black light compensa-
tion, and color enable.
This command can only be used in a single channel display
mode or 2x2 channels mode (select a video Port icon in the
Tree Browser window).
Tools
GPIO
Execute the GPIO command in the menu Tools to bring up the
GPIO dialog box. Select the port to access and select the digi-
tal output value. Click the write or read button to write/read to/
from the digital I/O ports.
This command can only be used in the single channel display
mode or in 2x2 channels mode (select a video Port icon in the
Tree Browser window).