User`s manual

ViewCreator Utility 45
EEPROM
Execute EEPROM command in the menu Tools to bring up the
EEPROM dialog box. Enter the offset and output values, and
then click the Write button to write the value into the EEPROM.
Enter the offset value and click the Read button to read the
value from the EEPROM.
Valid offset values are between 0-127. Valid output values are
in the range of 0 and 255. The value in the EEPROM will not be
erased when the system is powered off.
This command can only be used in the single channel display
mode or 2x2 channels mode (select a video Port icon in the
Tree Browser window).
OSD
On Screen Display is supported by the ADLINK Hardware
MPEG4 Device. It is used to overlay and OSD string with
video, which will generate a corresponding OSD effect.
Execute an OSD command in the menu Tools to bring up the
OSD dialog box. Enter the values of X and Y as the macro-
block coordinate (X,Y) for the first font of display text, and enter
display text in the Text textbox.
The maximum display text is limited to 94 characters. The size
of a character is 16x16.
This command can only be used in single channel display
mode and the duration of file recoding.