User`s manual

36 Installation Guide
#cd devfsd
#make & make install
5. Make USB mouse/keyboard work:
If you are using USB mouse for Kernel 2.6.9, please modify /
etc/rc.sysinit, replace "mousedev" with "usbmouse". If you are
using USB keyboard for Kernel 2.6.9, please modify /etc/
rc.sysinit, replace "keybdev" with "usbkbd".
6. Reboot the Linux operation system
# reboot
Install the Driver
Install driver under Linux terminal following these steps:
1. Uncompress MPG24 package:
# cd /home
# tar zxvf MPG24-kernel2.6.9.tar.gz
2. Copy supporting files:
# mkdir /etc/wis
# cp /home/MPG24/SupportFiles/* /etc/wis
3. Create device node for Wisgo7007SB
# mknod /dev/wisgo7007_0 c 240 0
# mknod /dev/wisgo7007_1 c 240 1
# mknod /dev/wisgo7007_2 c 240 2
# mknod /dev/wisgo7007_3 c 240 3
4. Install modules
# cd /home/MPG24
# ./mpg24.sh reload
Ignore the errors: Module xxxxx doesn’t exist in /proc/modules.
Note: Remember to set the pin 4 of s1 on MPG24 board for
NTSC(off) or PAL(on) video format. The pin 1~3 of s1 on
MPG24 board are used for Card ID. Normally, you need to
install the driver, shutdown the computer, plug the MPG24,
restart the computer, and then the OS will detect a new hard-
ware.
Upgrade Linux Kernel to RedHat Fedora 3
The new version can support RedHat Fedora 3. The only thing
that should be paid special attention is that you should copy