User`s manual

52 Extension Modules
Analog Out DA x 2
Resolution: 16 bits
Settling Time: 10mS Max.
Output Range: ±10V
Output Coupling: DC
Output Impedance: 30W Max.
Output Driving: ±5mA max.
Power On State: Floating
Calibration: Self-Calibration
Gain Error: ±3% Max.
Offset Error:
1mV Max. for PCI board
0.2mV Max. for MPC board
Analog In
AD x 2 (Available for MPC/
cPCI board)
Resolution: 16 bits, no missing code
Sampling Rate: 250kS/s
Programmable Input Range: ±10V, ±5V,
±2.5V
Calibration: Self-Calibration
Gain Error: ±0.03% Max.
Offset Error: 0.2mV Max.
Encoder Interface
32-bit Encoder input (A,B,Z)
x 3 channel ( PCI board )
2 channel ( MPC/cPCI
board)
Incremental Encoder Input
Max. Speed : 5Mhz
Input Voltage: 0 - 5V dc
Logic H: 3-5V
Logic L: 0-2.4V
Input resistor: 220O @ 0.125W
Isolated voltage:500 Vrms
Pulse Output
2 channel differential pulses
output (Available for MPC/
cPCI board)
OUT/DIR, CW/CCW, AB phase select-
able
Max. Output Frequency: 4.16 MHz
Isolated voltage:500 Vrms
Aux. DIO
Board to board synchronous
interface (PCI board only)
CN4
6 TTL Level Digital Output (at
CN3 on Extension bracket of
PCI board only)
Voltage output high:
Typical: 5V
Min: 2.4v @ 15mA
Voltage output low:
Typical: 0.3V @ 24mA
Max: 0.5V
Item Description
Table 5-2: MPC-8366/72 Specifications