User`s manual

38 Getting Started
4.4 Software Settings
The GEME system software is installed before shipping according
to the customers’ configuration options. This section provides the
necessary information for customers who need to rebuild their OS.
Step1:
Check IRQ resources setting in BIOS (Set the IRQ number
according to the user’s system configuration - please see
section 4.3 for further information). For example, the user will
be required to change the settings of IRQ 5, 9, and 10 as
“Legacy ISA” in BIOS if there are three PC 104 cards in GEME.
The remaining IRQ settings are set as “PCI/ISA PnP”. When
GEME is booted up, press the “DEL” key to enter the BIOS
setting screen as follows.
Step2:
The user will be required to register their PC104 card in the
Windows system. For example, the user can find the “Registry
Utility” from the MPC-8372 folder after installing the MPC-8372
driver. The screen is shown below. If there are other PC104
modules in GEME, the corresponding utility can also be found.