User`s manual

34 Getting Started
4.2 IDE Boot Sequence Settings
The Phoenix-Award BIOS provides a Setup utility program for
specifying system configuration and settings. The Setup utility is
stored in BIOS ROM. When the system is powered up, BIOS is
activated. Press the <Del> key immediately to enter the Setup
utility. If there is a delay in pressing the <Del> key after BIOS is
activated, POST (Power On Self Test) will continue with its test
routines, thus preventing the user from entering Setup. Should the
user still wish to enter into Setup, restart the system by pressing
the “Reset” button or simultaneously pressing the <Ctrl>, <Alt>,
and <Delete> keys. The system can also be restarted by switching
the system off and back on again. Upon power up, the following
message will appear on the screen:
Press <DEL> to Enter Setup
In the Setup utility program, the user can make changes by
pressing the arrow keys to highlight items, <PgUp> and <PgDn>
keys to change entries, <Enter> to select, <F1> for help, and
<Esc> to quit. When the user enters the Setup utility, the Main
Menu screen will appear on the screen. The Main Menu allows the
user to select from various setup functions and exit choices.
IDE device 1 IDE device 2 IDE device 3
IDE Primary Master HDD-0 -- -- HDD-0 HDD-0 -- HDD-0
IDE Primary Slave -- HDD-0 -- HDD-1 -- HDD-0 HDD-1
IDE Secondary Master -- -- HDD-0 -- HDD-1 HDD-1 HDD-2
Table 4-1: IDE Boot Sequence Settings