User`s manual

Base Unit 15
interface fully supports the IEEE 1394-1995 standard for high-
performance serial bus and the IEEE 1394a-2000 supplement.
Full IEEE 1394a-2000 support includes: connection debounce,
arbitrated short reset, multi speed concatenation, arbitration
acceleration, fly-by concatenation, and port disable/suspend/
resume. GEME has two IEEE 1394a-2000 fully compliant cable
ports with transfer rates of 100/200/400 megabits per second
(Mbits/s).
Compact Flash Connector
GEME’s standard CompactFlash (CF) socket has an ATA interface
that is fully compatible with an IDE HDD and supports both type-I
and type-II CF cards. The CF socket is on the Secondary IDE port.
Parallel Port Connector
Parallel I/O interface signals are routed to a DB25 socket on the
front panel. This port supports full IEEE-1284 capability and
provides a basic printer interface that supports EPP and ECP
enhanced port modes.
IRQ and Address Setting
The IRQ, I/O address range and mode are all assigned by
BIOS. The following table outlines the parallel port default set-
tings:
PIN SIGNAL
1 +12V
2GND
3 TPB0-
4TPB0+
5TPA0-
6TPA0+
Table 2-10: IEEE1394 Connector