User`s manual

30 Installation Guide
5. Once perfectly aligned with an empty slot, press the
board firmly but carefully into the connector.
6. Anchor the board by replacing the screw.
7. Connect your video sources for image acquisition tests.
For details, refer to the “ViewCreator” utility.
8. Turn on the computer. In some cases, when the com-
puter boots up, the “Plug and Play” feature of Windows
will detect the new PCI card eight times (four videos and
four audios) and you will require drivers. For details, see
the “Installation Guide.”
3.2 Driver Installation
WDM Driver Installation
1. Insert the Automation All-in-one CD into the CD-ROM
drive and click Driver Installation.
Note: Do not plug the hardware before installing the software
driver.