User`s manual
Introduction • 3
Highest 2
Bitrate =
1024000*4
frame_rate = 30
Bitrate =
1024000
frame_rate = 30
Bitrate =
1024000/4
frame_rate = 30
Supports setting of initial motion detection area and assigning or creating
directory for saved files.
Save video file: Supports save continued video to M4V or AVI video file
format. User may play AVI file with MS Media Player after installing XVID
CODEC (see ADLINK All-in-One CD).
Save single image file: Supports save single image to BMP or JPEG image
file format.
1.1.3 MPEG4 Decoding
MPEG4 video decoding: Video decoding can be assigned a source from the
local memory buffer, file access, or TCP/IP port. The quality of decoded video
can be used to adjust the video encoding level. Decoding quality can also be
used to control the flow rate between encoder and decoder and to adjust
motion detection settings.
Save video file: Supports save continued video to M4V or AVI video file format,
User may play AVI file by MS Media Player after installing XVID CODEC (see
ADLINK All-in-One CD).
Save single image file: Supports save single image to BMP or JPEG image
file format.
1.1.4
Motion Detection
Up to four detection areas can be set in one frame or the entire frame can be
used for motion detection actions. The motion detection occurrence can be
adjusted for sensitivity.
1.1.5 TCP/IP Data Transmission
Video data can be transferred by TCP/IP after connecting to the IP of the
encoding site and data transmission speed can monitored using the flow rate.
1.1.6 Watch Dog Timer
A hardware watchdog is available on the PCI-MP4S and is able to monitor PC
application operation and will automatically reset the PC after a