User`s manual

Function Library • 38
Indicates the channel index for the MPEG4 encoder. The range of channels
is 0 – 15.
Local_Address:
Indicates the IP Address at the encoding site. Set 0, NULL or nil for default
setting.
Quality:
Quality value image 640*480 image 320*240 image 160*120
Lowest -2
Bitrate =
320000*4
frame_rate = 3
Bitrate =
320000
frame_rate = 3
Bitrate = 24
0000/4
frame_rate = 3
Low -1
Bitrate =
400000*2
frame_rate = 6
Bitrate =
400000
frame_rate = 6
Bitrate =
400000/4
frame_rate = 6
Normal 0
Bitrate =
480000*4
frame_rate = 15
Bitrate =
480000
frame_rate = 15
Bitrate =
480000/4
frame_rate = 15
High 1
Bitrate =
512000*4
frame_rate = 30
Bitrate =
512000
frame_rate = 30
Bitrate =
512000/4
frame_rate = 30
Highest 2
Bitrate =
1024000*4
frame_rate = 30
Bitrate =
1024000
frame_rate = 30
Bitrate =
1024000/4
frame_rate = 30
Bitrate:
Indicate the number of bits per second.
frame_rate:
Indicates the number of frames that the MPEG4 encoder will encode per second.
The range of the frame_rate is 1 – 30.
Angelo_PortNo:
The port number is the zero index of the Angelo series card. For example, if there
are two PCI-RTV-24 Angelo cards (card 0, card 1) in the system, and each
PCI-RTV-24 has four ports, the first port of card 0 is “0”, and the first port of card 1
is “4.”
Angelo_ChannelNo:
Angelo_ChannelNo indicate the channel index of the port described above. There
are four channels per port and the first channel index is 0.
Angelo_Color_Format:
RGB24 = 3,
Angelo_Video_Format:
0: Full NTSC, with image size 640*480,
1: Full PAL, with image size 640*480,