Specifications

Chapter 1. General description 11
Table 1-4 shows the minimum system configuration for a Power 780 system.
Table 1-4 Minimum features for Power 780 system
Note: Consider the following:
򐂰 A minimum number of four processor activations must be ordered per system.
򐂰 The minimum activations ordered with all initial orders of memory features #5600, #5601, and
#5602 must be 50% of their installed capacity.
򐂰 The minimum activations ordered with MES orders of memory features #5600, #5601, and #5602
will depend on the total installed capacity of features #5600, #5601, and #5602. This allows
newly ordered memory to be purchased with less than 50% activations when the currently
installed capacity exceeds 50% of the existing features #5600, #5601, and #5602 capacity.
򐂰 The minimum activations ordered with all initial orders of memory feature #5564 must be 192 GB
of 256 GB per each feature #5564 ordered (that is, 75% of the installed feature #5564 capacity).
򐂰 The minimum activations purchased with MES orders of feature #5564 memory, 0/256 GB, will
depend on the total installed capacity of feature #5564. This allows MES orders of feature #5564
memory to be purchased with less than 192/256 GB per each feature #5564 ordered when the
system activations currently installed exceed 75% of the existing feature #5564 capacity.
Power 780 minimum features Additional notes
1x CEC enclosure (4U) 򐂰 1x System Enclosure with IBM Bezel (#5595) or OEM Bezel
(#5596)
򐂰 1x Service Processor (#5664)
򐂰 1x DASD Backplane (#5652)
򐂰 2x Power Cords (two selected by customer)
– 2x A/C Power Supply (#5532)
򐂰 1x Operator Panel (#1853)
򐂰 1x Integrated Multifunction Card options (one of these):
– Dual 10 Gb Copper and Dual 1 Gb Ethernet (#1768)
– Dual 10 Gb Optical and Dual 1 Gb Ethernet (#1769)
1x primary operating system (one
of these)
򐂰 AIX (#2146)
򐂰 Linux (#2147)
򐂰 IBM i (#2145)
1x Processor Card (one of these) 򐂰 0/16 core, 3.92 GHz or 0/8 core, 4.14 GHz (TurboCore)
processor card (#5003)
򐂰 0/24 core, 3.44 GHz processor card (#EP24)
4x Processor Activations for
Processor Feature #4982 (#5469)
-
2x DDR3 Memory DIMM (one of
these)
򐂰 0/32 GB (4 X 8 GB), 1066 MHz (#5600)
򐂰 0/64 GB (4 X 16 GB), 1066 MHz (#5601)
򐂰 0/128 GB (4 X 32 GB), 1066 MHz (#5602)
򐂰 0/256 GB (4 X 64 GB), 1066 MHz (#5564)
32x Activations of 1 GB DDR3 -
POWER7 Memory (#8212)
-
For AIX and Linux: 1x disk drive
For IBM i: 2x disk drives
Formatted to match the system Primary O/S indicator selected,
or if using a Fibre Channel attached SAN (indicated by #0837) a
disk drive is not required.
1X Language Group (selected by
the customer)
-
Power 770 minimum features Additional notes