Specifications

10 IBM Power 770 and 780 Technical Overview and Introduction
1.4.3 Minimum features
Each system has a minimum feature set in order to be valid. Table 1-3 shows the minimum
system configuration for a Power 770.
Table 1-3 Minimum features for Power 770 system
Power 770 minimum features Additional notes
1x CEC enclosure (4U) 򐂰 1x System Enclosure with IBM Bezel (#5585) or OEM Bezel
(#5586)
򐂰 1x Service Processor (#5664)
򐂰 1x DASD Backplane (#5652)
򐂰 2x Power Cords (two selected by customer)
– 2x A/C Power Supply (#5632)
򐂰 1x Operator Panel (#1853)
򐂰 1x Integrated Multifunction Card options (one of these):
– Dual 10 Gb Copper and Dual 1 Gb Ethernet (#1768)
– Dual 10 Gb Optical and Dual 1 Gb Ethernet (#1769)
1x primary operating system (one
of these)
򐂰 AIX (#2146)
򐂰 Linux (#2147)
򐂰 IBM i (#2145)
1x Processor Card 򐂰 0/12-core, 3.72 GHz processor card (#4983)
򐂰 0/16-core, 3.3 GHz processor card (#4984)
4x Processor Activations
(quantity of four for one of these)
򐂰 One Processor Activation for processor feature #4983
(#5329)
򐂰 One Processor Activation for processor feature #4984
(#5334)
2x DDR3 Memory DIMMs (one of
these)
򐂰 0/32 GB (4 X 8 GB), 1066 MHz (#5600)
򐂰 0/64 GB (4 X 16 GB), 1066 MHz (#5601)
򐂰 0/128 GB (4 X 32 GB), 1066 MHz (#5602)
򐂰 0/256 GB (4 X 64 GB), 1066 MHz (#5564)
32x Activations of 1 GB DDR3 -
POWER7 Memory (#8212)
-
For AIX and Linux: 1x disk drive
For IBM i: 2x disk drives
Formatted to match the system Primary O/S indicator selected,
or if using a Fibre Channel attached SAN (indicated by #0837) a
disk drive is not required.
1X Language Group (selected by
the customer)
-
1x Removable Media Device
(#5762)
Optionally orderable, a standalone system (not network
attached) would required this feature.
1x HMC Required for every Power 770 (9117-MMC)