Specifications

8 IBM Power 770 and 780 Technical Overview and Introduction
򐂰 Disk-only I/O drawers
– Up to 56 EXP24S SFF SAS I/O drawers on external SAS controller (#5887)
– Up to 110 EXP12S SAS DASD/SSD I/O drawers on SAS PCI controllers (#5886)
– Up to 60 EXP24 SCSI DASD Expansion drawers on SCSI PCI controllers (7031-D24)
򐂰 IBM Systems Director Active Energy Manager™
The Power 770 operator interface controls located on the front panel of the primary I/O
drawer consist of a power ON/OFF button with a POWER® indicator, an LCD display for
diagnostic feedback, a RESET button, and a disturbance or system attention LED.
1.4.2 Power 780 system features
The following features are available on the Power 780:
򐂰 4U 19-inch rack-mount system enclosure
򐂰 One to four system enclosures: 16U maximum system size
򐂰 One processor card feature per enclosure (includes the voltage regulator):
– 0/16 core, 3.92 GHz or 0/8 core, 4.14 GHz (TurboCore) processor card (#5003)
– 0/24 core, 3.44 GHz processor card (#EP24)
򐂰 POWER7 DDR3 Memory DIMMs (16 DIMM slots per processor card):
– 0/32 GB (4 X 8 GB), 1066 MHz (#5600)
– 0/64 GB (4 X 16 GB), 1066 MHz (#5601)
– 0/128 GB (4 X 32 GB), 1066 MHz (#5602)
– 0/256 GB (4 X 64 GB), 1066 MHz (#5564)
򐂰 Six hot-swappable, 2.5-inch, small form factor, SAS disk or SSD bays per enclosure
򐂰 One hot-plug, slim-line, SATA media bay per enclosure (optional)
򐂰 Redundant hot-swap AC power supplies in each enclosure
򐂰 Choice of Integrated Multifunction Card options; maximum one per enclosure:
– Dual 10 Gb Copper and Dual 1 Gb Ethernet (#1768)
– Dual 10 Gb Optical and Dual 1 Gb Ethernet (#1769)
򐂰 One serial port included on each Integrated Multifunction Card
򐂰 Two USB ports included on each Integrated Multifunction Card plus another USB port on
each enclosure (maximum nine usable per system)