User`s manual

94 Utilities
PCIS-DASK
PCIS-DASK/X Utilities
number of pages of contiguous initially allocated memory for con-
tinuous analog input, analog output, digital input, and digital out-
put. The device driver allocates these memory sizes from the
memory management module.
After the selected driver is configured, type Y to confirm and return
to the dask_conf main screen. The configured driver now appears
at the Configured Cards list.
To modify the driver configuration, including the number of cards
and the buffer size, select the driver from the list, then assign the
new settings. When the number of cards is set to zero, the config-
uration for the selected driver is removed.
When configuration is finished, the device configuration informa-
tion is saved in pci-dask_xxx/drivers/pcidask.conf. The content of
dask.conf is shown on the following illustration.