User`s manual

90 Utilities
PCIS-DASK
Win32 Utilities
NOTE The default destination for the converted file with a .cvt
extension is in the same directory as the source file.
3. To change the default file path, click Browse, then
select the destination for the converted file.
4. To change the format of the converted file, click the For-
mat drop-down menu, then select from three available
data formats. Refer to the formats’ description below:
Z Scaled data to text file. The data in hexadecimal format
is scaled to engineering unit (voltage, ample, etc.)
according to the card type, data width, and data range,
then written to disk in text file format. This type is avail-
able for the data accessed from continuous AI operation
only.
Z Scaled data to binary file (float). The data in hexadeci-
mal is scaled to engineering unit (voltage, ample, etc.)
according to the card type, data width and data range,
then written to disk in binary file format. This type is
available for the data accessed from continuous AI oper-
ation only.