User`s guide

60 ? Sample Programs
Figure 7.2
Analog Input (A/D) : This is used to show the results of A/D conversion. You can select the Input channels (allows
multiple channels) and the input range (gain) you want to test from the main screen.
Analog output (D/A): This is used to show the results of D/A conversion. Turning the turner to set the output voltage.
You can also choose the output waveform (sine or square).
D/I and D/O: This is used to show the results of Read/Write data from/to digital input/output channels. To set the output
value, click the channel lights. The red light means onand the white light means off.