User`s manual

MotionCreatorPro 2 67
PCI-7856
User’s Manual
Operation Instructions:
A. Interpolation axes selection and operation parameter
settings including center position in ARC mode or target
position in Linear mode. The arc angle parameter can be
larger than 360.
B. Absolute or relative interpolation mode selection. In ARC
mode, it relates to the center position. In Linear mode, it
relates to the target position.
C. Command and position information. In Arc mode, only
two will be active.
Dedicated Motion I/O status
You are easily able to monitor or configure motion input and output
channel well.