User`s manual

MotionCreatorPro 2 61

PCI-7856

User’s Manual

Single Movement

Operation Instructions:

A. Command, feedback, error and target position informa-

tion. Command and feedback speed information. The

minimum speed value may limit by speed calculation

cycle time for low speed display.

B. Optional operation setting and button. The repeat mode

check box can be used in relative and absolute mode.

The axes will move between two positions or forward/

backward distance cyclically. You can set the delay time

between each move in unit of mini-second. The mini-

mum value is 1ms. The stop button is for relative, abso-

lute and velocity modes.