User`s manual

MotionCreatorPro 2 55
PCI-7856
User’s Manual
5.3 MotionCreatorPro 2 Form Introducing
5.3.1 Main Window
The main menu appears after running MotionCreatorPro 2. Refer
to the following illustrations for a description of the available func-
tions: File\Exit: Close and then exit this program.
A. Icons for operation modes. Some will be active when a
filed bus / motion item in the tree view was selected and
some will be active when an axis item is selected.
 Functions Button: Use these buttons to select function you
want test.
 Configuration
Button Function Description
Axis/Board Configuration Configure axis or board
parameter.
A
B
C