User`s manual

54 MotionCreatorPro 2
PCI-7856
User’s Manual
5.1 Execute MotionCreatorPro 2
After installing the software drivers for the PCI-7856 in Windows,
the MCP2 program can be located at <chosen path>\MCP2.exe.
Double click this file to run the program.
5.2 About MotionCreatorPro 2
Before running MotionCreatorPro2, the following should noted.
1. MotionCreatorPro2 is a program written by BCB 6.0, and
is available only for Windows with a screen resolution
higher than 1024x768. It cannot be run under DOS.
2. There are a couple files necessary for this program.
 MCP2.mdb records parameters and graphics
 MCPro2.ini records initial setting
3. MCP2 is a high integration program that is supports
many ADLINK motion control cards. Multiple cards can
be used in one system.