User`s guide

36 • Utility/Calibration
6.2.2 VR Assignment of cPCI/PCI-6208 and PCI-6216
There are either 8 or 16 voltage output channels depending on which
model of the card is used. For each channel, two VRs are used to adjust
for the range and offset of the output voltage. The following table shows
the assignment and function of each VR. You can find these designators
on the PCB.
VR of PCI6208V
or PCI6216V
Function
VR of
PCI6216V
Function
VR0-1 Ch #0 full range VR8-1 Ch #8 full range
VR0-2 Ch #0 offset VR8-2 Ch #8 offset
VR1-1 Ch #1 full range VR9-1 Ch #9 full range
VR1-2 Ch #1 offset VR9-2 Ch #9 offset
VR2-1 Ch #2 full range VR10-1 Ch #10 full range
VR2-2 Ch #2 offset VR10-2 Ch #10 offset
VR3-1 Ch #3 full range VR11-1 Ch #11 full range
VR3-2 Ch #3 offset VR11-2 Ch #11 offset
VR4-1 Ch #4 full range VR12-1 Ch #12 full range
VR4-2 Ch #4 offset VR12-2 Ch #12 offset
VR5-1 Ch #5 full range VR13-1 Ch #13 full range
VR5-2 Ch #5 offset VR13-2 Ch #13 offset
VR6-1 Ch #6 full range VR14-1 Ch #14 full range
VR6-2 Ch #6 offset VR14-2 Ch #14 offset
VR7-1 Ch #7 full range VR15-1 Ch #15 full range
VR7-2 Ch #7 offset VR15-2 Ch #15 offset
Table 5. VR Assignment
Note: For PCI-6208V/6216V (REV: B1 or later), the designator of VRs
are changed to VRm_n, where m = 0 ~ 15 and n = 1 or 2.
Example VR6-2 on PCI-6208V/6216V REV: A3 will be changed
to VR6_2 on REV: B1 or later.