User`s guide

Utility/Calibration •• 31
6.1.2 Calibration
This function guides you to calibrate the 6208 series card. The calibration
program serves as a useful test of the 6208 series D/A functions and can aid
in troubleshooting if problems arise.
Note : For an environment with frequently large changes of temperature and
vibration, a 3 months re-calibration interval is recommended. For
laboratory conditions, 6 months to 1 year is acceptable
When you choose the calibration function from the main menu list, a
calibration items menu is displayed on the screen. After you select one of the
calibration items from the calibration items menu, a calibration window
shows. The instructions will guide you to calibrate each item step by step.
If you select 1, the following figure displays on the screen: