User`s manual

BIOS Setup 69
NuPRO-935A
5.7.2 Advanced Chipset Settings
ACPI Aware O/S
This option specifies which OS support ACPI. The options are
Enabled and Disabled.
Resume On PME#
This option specifies if the PME#. event will generate a system
wake event. The sub-options are Enabled and Disabled.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X Power Off: Set this value to always power off the system
while AC power is restored.
X Power On: Set this value to always power on the system
while AC power is restored.
X Last State: Set this value to power off/on the system
depending on the last system power state while AC power
is restored.
Power Button Mode
This option specifies the effect when the power button pressed.
X On/Off: The system is powered down immediately if the power
button is pressed.
X Suspend: The system is powered down if the power button is
pressed for more than four seconds. Pressing the button
momentarily (for less than 4 seconds) will put the system in
"suspend" mode.