User`s guide

Getting Started 41
3
Getting Started
This chapter provides information on how to install necessary components
on the cPCI-6810/6820 and cPCI-R6820 RTM. The topics covered are:
CPU and heat sink
Memory module installation
HDD installation on main board
HDD installation on RTM
CF installation on RTM
PMC installation
RTM installation
Main board installation
3.1 CPU and Heatsink
The cPCI-6810/6820 SBC supports the Intel mobile Pentium-III/Tualatin
processors, which is pre-mounted to the PCB (printed circuit board). The
heatsink is also pre-mounted in the factory. There is no jumper setting
necessary to set the CPU operating frequency or CPU type.
0 DO NOT try to replace the CPU in the field or remove the heatsink. It will
cause board defects and void all warranty for the board.