User`s guide

Jumpers and Connectors • 35
2.3.15 CompactPCI J3 and rJ3 Pin Assignments
Pin Z A B C D E F
19 GND
GND +12V
(1)
GND -12V
(1)
GND
GND
18 GND LPa_DA0+ LPa_DA0-
GND
LPa_DC0+ LPa_DC0- GND
17 GND LPa_DB0+ LPa_DB0-
GND
LPa_DD0+ LPa_DD0- GND
16 GND LPb_DA1+ LPb_DA1-
GND
LPb_DC1+ LPb_DC1- GND
15 GND LPb_DB1+ LPb_DB1-
GND
LPb_DD1+ LPb_DD1- GND
14 GND
+3.3V
(1)
+3.3V
(1)
+3.3V
(1)
+5V
(1)
+5V
(1)
GND
13 GND PMCIO5 PMCIO4 PMCIO3 PMCIO2 PMCIO1 GND
12 GND PMCIO10 PMCIO9 PMCIO8 PMCIO7 PMCIO6 GND
11 GND PMCIO15 PMCIO14 PMCIO13 PMCIO12 PMCIO11 GND
10 GND PMCIO20 PMCIO19 PMCIO18 PMCIO17 PMCIO16 GND
9 GND PMCIO25 PMCIO24 PMCIO23 PMCIO22 PMCIO21 GND
8 GND PMCIO30 PMCIO29 PMCIO28 PMCIO27 PMCIO26 GND
7 GND PMCIO35 PMCIO34 PMCIO33 PMCIO32 PMCIO31 GND
6 GND PMCIO40 PMCIO39 PMCIO38 PMCIO37 PMCIO36 GND
5 GND PMCIO45 PMCIO44 PMCIO43 PMCIO42 PMCIO41 GND
4 GND PMCIO50 PMCIO49 PMCIO48 PMCIO47 PMCIO46 GND
3 GND PMCIO55 PMCIO54 PMCIO53 PMCIO52 PMCIO51 GND
2 GND PMCIO60 PMCIO59 PMCIO58 PMCIO57 PMCIO56 GND
1 GND VIO
(2)
PMCIO64 PMCIO63 PMCIO62 PMCIO61 GND
Pin Z A B C D E F
Table 24: CompactPCI J3 and rJ3 pin assignments
Note:
1. The +3.3V, +5V and +/-12V power lines are supplied from the main
board to the RTM.
2. The VIO is connected to the VIO plane (default is +5V) of the PMC slot
#2.