User`s guide

Introduction • 13
• CPU, memory operating frequency auto-detection
• Bootable from USB storage devices including USB-Floppy, USB-ZIP
USB-CD-ROM and USB-HDD.
• Option OEM BIOS features
9 Customized OEM splash image / power on screen
9 Serial remote-console redirected to serial COM1 port
Note: Due to BIOS segment limitations; enabling the remote console
function may occupy the same memory space as other ROM
mapping add-on or boot-up devices such like Pre-boot Agent of
Ethernet Boot ROM, SCSI Boot ROM or add-on EIDE Boot ROM. It
is recommended only one ROM-mapping add-on or boot-up device
be enable when enabling the remote console function.
Gigabit Ethernet
• Two Gigabit Ethernet (GbE) ports with Intel
®
82546EB Ethernet
controller, based on local 66MHz/64-bit PCI bus
• Support 1000Base-T, 100Base-TX and 10Base-T (IEEE 802.3, 802.3u,
and 802.3ab).
• IEEE802.3x compliant flow control, support auto-negotiation and link
setup
• GbE connection on PICMG 2.16 PSB or on RTM rear access
• Speed and connection status LED on the front panel
Graphic Display (available on cPCI-6820)
• C&T 69000 VGA controller with integrated 2M bytes memory
• VGA DB-15 connectors on front panel
USB Interface
• Supports up to four USB version 1.1 ports with integrated USB host
controller. Two USB ports (USB-0 and USB-1) are BIOS configurable for
front or rear access. Two USB ports (USB-2 and USB-3) are rear access
only.
• USB ports provide 0.5A @ 5V power for peripheral devices with over
current protection
IDE Ports
• Bus master IDE controller supports two ultra ATA-100 interfaces.
• Primary IDE is on board with 44-pin IDE connector
• Both Primary and Secondary IDE ports are on J5 for RTM extension.
Super I/O, WDT and Hardware Monitoring
• Chipset: NS PC87417
low pin-count (LPC)
Server I/O controller