User`s guide

Introduction • 3
1.2 Features
1.2.1 cPCI-6810/6820 Features
• PICMG 2.16 CompactPCI Packet Switching Backplane (cPSB)
Compliant
• PICMG 2.9 System Management Bus Compliant
• Standard 6U form factor, 1-slot (4HP) wide
• Design for mobile Pentium-III/Tualatin CPU running at FSB 133MHz,
single processor (cPCI-6810) or dual processors (cPCI-6820)
• Up to four 144-pin SO-DIMM sockets support up to 2GB PC-133 SDRAM
• 64-bit/66MHz CompactPCI,
• Universal operation for both system and peripheral slots
• Full hot-swap support
• On-board up to two 64-bit PMC module slot
1.2.2 cPCI-R6820 Features
• PICMG 2.0 CompactPCI Specification R3.0 Compliant
• 6U form factor, 1-slot (4TE/HP) in width, 80mm in board depth
• Design for cPCI-6810 and 6820 series front board
• Supports dual RJ-45 GbE connectors, on-board dual EIDE interfaces with
CF socket and housing for on-board 2.5” ATA HDD
• Supports 2 USB ports (type A connector), COM port over RJ-45
connector, 1 VGA port, keyboard and mouse combo connector, and
optional COM2 connector.