User`s guide

Motion Creator • 61
5.1 Main Menu
Main Menu will appear when executing Motion Creator. Figure 5.1 shows
the Main Menu.
Figure 5.1 Main Menu of Motion Creator
From main menu window all PCI-8134 cards and their axes and the
corresponding status can be viewed. First of all, check if all the PCI-8134
cards which are plugged in the PCI-Bus can be viewed on “Select Card”
column. Next select the card and axis you want to configure and operate.
Since there are totally four axes on a card, the axis number of first axis on
n-the card will be numbered as 4*(n-1). Bas e address and IRQ level of the
card are also shown on this window.