User`s guide

32 • Signal Connections
To let an external signal to initiate simultaneous start/stop, connect the
7406 (open collector) or the equivalent circuit as follows.
3.13 Daughter Board Connector
The CN2 connector of PCI-8134 can be connected with DIN-100S,
including a cable ACL-102100 (a 100-pin SCSI-II cable). DIN-100S is a
general purpose DIN-socket with 100-pin SCSI-II connector. It has easily
wiring screw terimal and easily installation DIN socket that can be mounted
on DIN-rails
Please check the NuDAQ catalog by ADLink for further information of DIN-
100S
STOP
7406
STP
CN4
PCI-8134 #1 PCI-8134 #2 PCI-8134 #3
CN4
CN4
STA
STP
STA
STP
STA
STP
STA
STP
STA
STP
STA
7406
START