User`s guide

8 • Installation
2.2 PCI-8134 Outline Drawing
Figure 2.1 PCB Layout of the PCI-8134
CN1: External Power Input Connector
CN2: Input / Output Signal Connector
CN3: Manual Pulser Signal Connector
CN4: Simultaneous Start / Stop Connector
2.3 Hardware Installation
2.3.1 Hardware configuration
PCI-8134 has plug and play PCI controller on board. The memory usage
(I/O port locations) of the PCI card is assigned by system BIOS. The
address assignment is done on a board-by-board basis for all PCI cards in
the system.
Front Panel