User`s guide

104 •Function Library
6.17 Interrupt Control
@ Name
_8134_Set_INT_ENABLE – Set interrupt enable
W_8134_INT_Enable – Set interrupt enable
W_8134_INT_Disable – Set interrupt disable
W_8134_Set_INT_Control – Set interrupt event handle
set_int_factor – Set interrupt generating factors
get_int_axis – Get the axis which generates interrupt
get_int_status – Get the interrupting status of axis
@ Description
_8134_Set_INT_ENABLE:
This function is used to enable interrupt generating to host PC. (This
function just support DOS only.)
W_8134_INT_Enable:
This function is used to enable interrupt generating to host PC. (This
function just support Window 95 and Window NT only.)
W_8134_INT_Disable:
This function is used to disable interrupt generating to host PC. (This
function just support Window 95 and Window NT only.)
W_8134_Set_INT_Control :
This function is used to assign the window INT event. (This function
just support Window 95 and Window NT only.)
set_int_factor:
This function allows users to select factors to initiate the INT signal.
PCI-8134 can generate INT signal to host PC by setting the relative bit
as 1. The definition for each bit is as following: