User`s guide

8

Introduction
 Digital Trigger (D.Trig)

Compatibility: TTL/CMOS

Response: Rising or falling edge

Pulse Width: 10ns min
 System Synchronous Interface (SSI)

Trigger lines: 7
 Stability

Recommended warm-up time: 15 minutes

On-board calibration reference:

Level: 5.000V

Temperature coefficient: 2ppm/C

Long-term stability: 6ppm/1000Hr
 Physical

Dimension: 175mm by 107mm
 I/O connector: 68-pin female VHDCI type (e.g. AMP-787254-1)
 Power Requirement (typical)

+5VDC, 1.2A
 Operating Environment

Ambient temperature: 0 to 55C

Relative humidity: 10% to 90% non-condensing
 Storage Environment

Ambient temperature: -20 to 70C

Relative humidity: 5% to 95% non-condensing