Specifications
NuPRO BIOS Users Manual • 25
12. Set Supervisor / User Password
These two options set the system password. Supervisor Password sets a
password that will be used to protect the system and Setup utility. User
Password sets a password that will be used exclusively on the system. To
specify a password, highlight the type you want and press <Enter>. The Enter
Password: message prompts on the screen. Type the password, up to eight
characters in length, and press <Enter>. The system confirms your password
by asking you to type it again. After setting a password, the screen
automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted to
enter the password. A message will confirm the password to be disabled.
Once the password is disabled, the system will boot and you can enter Setup
freely.
CMOS Setup Utility – Copyright (C) 1984-2001 Award Software
Standard CMOS Features Frequency/Voltage Control
Advanced BIOS Features Load Fail-Safe Defaults
Advanced Chipset Features Load Optimized Defaults
Integrated Peripherals Set Supervisor Password
Power Management Setup Set User Password
PnP/PCI Configurations Save & Exit Setup
PC Health Status Exit Without Saving
Esc : Quit F9 : Menu in BIOS á â à ß : Select Item
F10 : Save & Exit Setup
Set Supervisor Password
Enter Password: