Specifications

18 • NuPRO BIOS Users Manual
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank This selection will cause the system to turn
off the Vertical and horizontal synchronization
ports and Write blanks to the video buffer
DPMS Allows the BIOS to control the video display
card if it supports the DPMS feature
Blank Screen This option only writes blanks to the video
buffer
Video Off In Suspend
This determines the manner in which the monitor is blanked. The default
is Yes.
Suspend Type
Select the Suspend Type.
PWRON Suspend
Use the power button to decide whether the
system is in suspend or not.
Stop Grant
<Default>
When the system is idle, it will be in
suspend mode.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices
except the CPU will be shut off.
Disabled Disable the Suspend mode
1 Hour After 1 hour of system inactivity, enter Suspend mode
40 min After 40 min of system inactivity, enter Suspend mode
30 min After 30 min of system inactivity, enter Suspend mode
20 min After 20 min of system inactivity, enter Suspend mode
12 min After 12 min of system inactivity, enter Suspend mode
8 min After 8 min of system inactivity, enter Suspend mode
4 min After 4 min of system inactivity, enter Suspend mode
2 min After 2 min of system inactivity, enter Suspend mode
1 min After 1 min of system inactivity, enter Suspend mode
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Disabled <Default> Don’t Enter the HDD power down mode
1 min ~ 15 min After the set time of system inactivity, HDD
power down