Specifications

NuPRO BIOS Users Manual • 17
6. Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after a
period of inactivity.
CMOS Setup Utility – Copyright (C) 1984-2001 Award Software
Power Management Setup
ACPI Function [Enabled]
Power Management [User Define]
Item Help
Video Off Method [DPMS] Menu Level 
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Instant-Off]
Wake-Up by PCI card [Disabled]
Power On by Ring [Enabled]
PWRON After PWR-Fail [Former-Sts]
CPU Thermal-Throttling [50.0%]
** Reload Global Timer Events **
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD, COM, LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
á â à ß : Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
ACPI function
ACPI stands for Advanced Configuration Power Interface. The default
setting of this field Disabled.
Power Management
This field allows you to select the type of power saving management
modes. There are three selections for Power Management.
User Define
<Default>
Each of the ranges is from 1 min. to 1hr. Except
for HDD Power Down which ranges from 1 min.
to 15 min.
Min Saving Minimum power management
Max Saving Maximum power management.
Disabled No power management.