Specifications

NuPRO BIOS Users Manual • 9

Setup

the system always boots up and prompts for the

Supervisor Password only when the Setup utility is

called up

System the system prompts for the User Password every

time you boot up

NOTE: To disable security, select PASSWORD SETTING at Main Menu

and then you will be asked to enter the password. If you do not

type anything and just press <Enter> key, it will disable security.

Once the security is disabled, you can boot up the system and

access to Setup freely.

OS Select for DRAM > 64MB

This option allows the system to access greater than 64MB of DRAM

memory when used with OS/2 that depends on certain BIOS calls to

access memory. The default setting is Non-OS/2.

Summary Screen Show

When POST, BIOS will lists the PCI devices and system configurations on

the screen to tell user what configurations are on the system. This item

allows you to decide whether system shows the configuration or not. The

default is Enabled.