Specifications

8 • NuPRO BIOS Users Manual
Boot Up Floppy Seek
Enabled The B
IOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40
tracks while 760K, 1.2M and 1.44M all have 80 tracks
Disabled
<Default>
BIOS will not search the type of floppy disk drive by
track number
Boot Up NumLock Status
On
<Default>
Keypad is number keys
Off Keypad is arrow keys
Gate A20 Option
This field allows you to select how Gate A20 is worked. Gate A20 is a
device used to address memory above 1 MB.
Fast
<Default>
The A20 signal controlled by chipset specific
method
Normal The A20 signal controlled by keyboard controller or
chipset hardware
Typematic Rate Setting
Enabled Enable typematic rate and typematic delay
programming
Disabled
<Default>
Disable typematic rate and typematic delay
programming. The system BIOS will use default
value of these 2 items and the default controlled by
keyboard
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers repeated
keystrokes speeds. You can select speed range from 6 to 30 characters
per second. By default, this item is set to 6.
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set the time
interval for displaying the first and second characters. By default, this item
is set to 250msec.
Security Option
This field allows you to limit access to the System and Setup.