User`s guide

ManualsBrandsADLINK Technology ManualsMotherboardsNuPRO-760

Introduction • 11

♦ Digital Trigger (D.Trig)

• Compatibility: TTL/CMOS

• Response: Rising or falling edge

• Pulse Width: 10ns min

♦ System Synchronous Interface (SSI)

• Trigger lines: 7

♦ Stability

• Recommended warm-up time: 15 minutes

• On-board calibration reference:

P Level: 5.000V

P Temperature coefficient: ±2ppm/°C

P Long-term stability: 6ppm/1000Hr

♦ Physical

• Dimension:

P 175mm by 107mm for DAQ-22XX

P Standard CompactPCI form factor for PXI-22XX

• I/O connector: 68-pin female VHDCI type (e.g. AMP-787254-1)

♦ Power Requirement (typical)

• +5VDC:

P 3A for DAQ/PXI-2204

P 2A for DAQ/PXI-2205/2206

♦ Operating Environment

• Ambient temperature: 0 to 55°C

• Relative humidity: 10% to 90% non-condensing

♦ Storage Environment

• Ambient temperature: -20 to 70°C

• Relative humidity: 5% to 95% non-condensing