User`s guide

78 • Hardware Doctor Utility
Note: Only the fan with three output pins can be monitored!
Temperature:
All temperature-monitoring items only permit users to change the high limit,
and the low limit will be set automatically as the high limit minus 5 degree
C.
Once the CPU/System temperature over the high limit, the warning
message will pop up and status will turn "Red". The status will not recover
to be " Green" until the temperature gets lower than the high limit minus 5
degree C. Currently we have one thermostat on board for CPU
temperature. You can use another thermostat connect to JP6 (two pins
connector) as system temperature sensor.