User`s guide

70 • LAN Driver Installation Guide
1. Run the file SETUP.EXE typing a:\setup or
D:\NUPRO\NuPRO595\LAN DRIVER\setup.exe in the DOS prompt,
assuming your floppy disk drive is drive A. Upon doing so, the system
starts the Setup Utility and shows the following screen.
8255x-based PCI EtherExpress™ adapter Setup V4.21
Main Menu
Automatic setup
View adapter configuration
Test adapter
Install network drivers
View Help files
Exit Setup
Choose AUTOMATIC SETUP to view the adapter’s configuration, make sure it
works properly, and install the software needed to connect to your network.
Help = F1 Exit = Esc Select = ↑↓ Action = ↵
2. Selecting View adapter configuration will show the following.
8255x-based PCI EtherExpress™ adapter Setup V4.21
View adapter configuration
Adapter type:……………………
Adapter part number:…………..
Network address:……………….
Interrupt:…………………………
Bus:………………………………
Slot:………………………………
Device:…………………………..
Network speed:…………………
Physical layer device:………….
Duplex:…………………………..
Adapter capabilities:
100BaseTX, full or half duplex.
10BaseT, full or half duplex.
Press Enter to continue
Help = F1 Previous = Esc Continue = Enter PCI Advanced = F5