User`s guide

Intel PIIX Bus Master IDE Driver Installation

•

5. Click Yes if you agree to continue. NOTE: If you click 'No', the

program will terminate.

6. Select INSTALL, to install the PIIX Bus Master IDE Device Driver

when prompted to do so.

Note: If the driver is currently installed on the system, SETUP will ask

you whether or not you want to continue. Follow the prompts on

the screen to install the driver if desired.

7. Click 'OK' to restart the system when prompted to do so.

8. Follow the screen instructions and use default settings to complete the

setup when Windows 95 is re-started. Upon re-start, Windows 95* will

display that it has found an Intel PCI Bus Master IDE controller

hardware and is installing hardware for it.

If a New Hardware Found dialog box is displayed requesting the location

of the drivers, use the mouse to click on the scrollbar and click on the

<Windows 95 directory>\System\IOSubSys path:

For example:

Click on C:\WINDOWS\SYSTEM\IOSUBSYS\

Click OK.

9. Select Yes, when prompted to re-start Windows 95.

Note: After installation, the following driver and related files are stored

as listed.

<Windows 95 directory>\System\IOSubSys \IDEATAPI.MPD

<Windows 95 directory>\System\IOSubSys \PIIXVSD.VXD

<Windows 95 directory>\INF\IDEATAPI.INF