User`s guide

BIOS Configuration

•

u PNP/PCI Configuration

This option configures the PCI bus system. All PCI bus systems on the

system use INT#, thus all installed PCI boards must be set to this value.

ROM PCI/ISA BIOS

PNP/PCI CONFIGURATION

AWARD SOFTWARE INC.

PNP OS Installed : No PCI IDE IRQ Map To : PCI-AUTO

Resources Controlled by : Manual Primary IDE INT# : A

Reset Configuration Data : Disabled Secondary IDE INT# : B

IRQ-3 assigned to : Legacy ISA Used MEM base addr : N/A

IRQ-4 assigned to : Legacy ISA

IRQ-5 assigned to : PCI/ISA PnP

IRQ-7 assigned to : Legacy ISA

IRQ-9 assigned to : PCI/ISA PnP

IRQ-10 assigned to : PCI/ISA PnP

IRQ-11 assigned to : PCI/ISA PnP

IRQ-12 assigned to : PCI/ISA PnP

IRQ-14 assigned to : PCI/ISA PnP

IRQ-15 assigned to : PCI/ISA PnP

DMA-0 assigned to : PCI/ISA PnP

DMA-1 assigned to : PCI/ISA PnP ESC : Quit á â ß : Select Item

DMA-3 assigned to : PCI/ISA PnP F1 : Help PU/PD/+/- : Modify

DMA-5 assigned to : PCI/ISA PnP F5 : Old Values (Shift) F2 : Color

DMA-6 assigned to : PCI/ISA PnP F6 : Load BIOS Defaults

DMA-7 assigned to : PCI/ISA PnP F7 : Load Setup Defaults

PNP OS Installed

This field allows you to specify if the operating system installed in your

system is plug and play aware.

Note: Operating systems such as DOS, OS/2, and Windows 3.x do not

use PnP.

Yes Operating system supports PnP device

Operating system doesn’t support PnP device

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices

automatically. However, this capability needs you to use a PnP operating

system such as Windows 95.

Auto

PnP BIOS configure all compatible devices

automatically

Manual User can assign IRQ & DMA to the devices