User`s guide

BIOS Configuration • 41
Swap Floppy Drive
This item allows you to determine whether to enable Swap Floppy Drive or
not.
Enabled
The BIOS swaps floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes
Drive A.
Disabled
<Default>
Disable the BIOS to swap floppy drive
Boot Up Floppy Seek
Enabled
<Default>
The BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40 tracks
while 760K, 1.2M and 1.44M all have 80 tracks
Disabled
BIOS will not search the type of floppy disk drive by
track number
Boot Up NumLock Status
On
<Default>
Keypad is number keys
Off Keypad is arrow keys
Boot Up System Speed
High
<Default>
Set the speed to high
Low Set the speed to low
Gate A20 Option
This field allows you to select how Gate A20 is worked. Gate A20 is a
device used to address memory above 1 MB.
Fast
<Default>
The A20 signal controlled by chipset specific method
Normal
The A20 signal controlled by keyboard controller or
chipset hardware