User`s guide

•

Installations

u CN11: COM1 Serial Port

CN11, a 10-pin header connector, is an onboard serial port of the

NuPRO-590. The following table shows the pin assignments of this

connector.

Pin #

Signal Name

1 DCD, Data carrier detect

2 RXD, Receive data

3 TXD, Transmit data

4 DTR, Data terminal ready

5 GND, ground

6 DSR, Data set ready

7 RTS, Request to send

8 CTS, Clear to send

9 RI, Ring indicator

10 NC

u CN10: COM2 Serial Port

CN10, a 10-pin header connector, is the onboard COM2 serial port of the

NuPRO-595. The following table shows its pin assignments.

Pin #

Signal Name

RS-232 R2-422 RS-485

1 DCD TX- DATA-

2 RX TX+ DATA+

3 TX RX+ NC

4 DTR RX- NC

5 GND GND GND

6 DSR RTS- NC

7 RTS RTS+ NC

8 CTS CTS+ NC

9 RI CTS- NC

10 NC NC NC