Specifications

3-30 Command Set
3. 20. Enable/Disable Open
Thermocouple Detection
@Description
Enable and disable the open thermocouple detection function.
@Syntax
$(Addr)O(Status)<CR>
$ Command leading code.
(Addr) Address ID
O Enable/Disable Open thermocouple detection
command
(Status) 0: Disable Open thermocouple detection
1: Enable Open thermocouple detection
@Response
!(Addr)<CR>
or
?(Addr)<CR>
!
Command is valid.
(Addr) Address ID.
? Command is invalid.
@Example
User command: $05O0<CR>
Response: ! 05<CR>
This command is to disable Open thermocouple detection.
User command: $05O1<CR>
Response: ! 05<CR>
This command is to enable Open thermocouple detection.
(6018)