Specifications

Introduction 1-1
1. Introduction
1. 1. About the NuDAM Analog Input Modules
The NuDAM provides a series of analog input modules which can sense
the analog signal or to control the remote devices. The basic features of
each module are shown here.
• NuDAM-6011/D : multi-functions high gain analog input module
• NuDAM-6012/D : multi-functions analog input module
• NuDAM-6013 : 3 channels RTD input module
• NuDAM-6014D:Analog (Transmitter) input module with LED display
• NuDAM-6017 : 8 channels analog input module
• NuDAM-6018 : 8 channels thermocouple input module
V The models with an extended D have the same command set and
specification as without D, except the D version has a 5 1/2 LED Display.
1. 2. Overview of NuDAM-6011/D
What is NuDAM-6011/D ?
NuDAM-6011/D is a multi-functions analog input module with cold junction
compensation (CJC). The maximum input voltage range of analog input
channel is ±2.5V. The high gain feature allows very small full range of
±15mV. To measure temperature by directly connect the thermal couple is
possible because of using the CJC inside and the high gain feature. The
voltage range of the ADC can be set according to different types of thermal
couple. The ADC can be calibrated by programming without handy
adjustment. This feature insure the best performance under different
environment.
The module provides the analog signal monitor or the alarm function. The
high and low bound of the alarm limit can be set by programming. The
alarm status can be sent to digital output channels if this function is ON.
The supervisor of a factory can ‘see’ or ‘hear’ the alarm if the digital output
channel control a real alarm device. The two digital output channels can be
set for general purpose use if the alarm is disabled.