Specifications

3-28 Command Set
3. 19. Read Open Thermocouple Detection of
Channel N
@Description
Read the status of open thermocouple from specified channel number
or all channel.
@Syntax
$(Addr)B(ChannelNo)<CR>
$ Command leading code.
(Addr) Address ID
B Open thermocouple detection command code
ChannelNo Channel number, range( 0-7) for specified channel,
A for all the channel
@Response
!(Addr)(OpSts)<CR>
or
?(Addr)<CR>
!
Command is valid.
(Addr) Address ID
(OpSts) For specified channel ( 0-7) (1 character)
0 : Close thermocouple
1 : Open thermocouple
For all the channel ( 00-FF) (2 character)
Two character hexadecimal value, for bit 0-7
Representing the corresponding open
thermocouple status channel 0-7.
? Command is invalid.
(6018)