Specifications

Command Set 3-21

3. 12. Offset Calibration

@Description

To correct the offset errors of AD converter by using the offset

calibration.

@Syntax

$(Addr)1<CR>

$ Command leading code

(Addr) Address ID

1 Offset calibration.

@Response

!(Addr)<CR>

?(Addr)<CR>

! Command is valid.

? Command is invalid.

(Addr) Address ID.

@Example

User command: $061<CR>

Response: !06<CR>

To perform the offset calibration for analog input module at specified

address 06 (Hex).

Note : To perform the calibration, a proper input signal should be

connected to the analog input module. Different input range

have different input voltage, detail refer chapter 5 “Calibration” .

(6011/D, 6012/D

6014D, 6017, 6018)